anyone get these before and know how to fix or did i fry my pcm.
Error 150, severity 2, unable to disable normal message transmission. it pops up on step 5 of 25 during the read. next is error 167 severity 2 request mode AO: NO RESPOSE. this one happened during a recovery. now when i last tried to write the pcm it stopped part way through and the car would no longer start i could hear the fuel pump come on for a split second and the car would not even turn over. switched pcm and the car started. any input would be great thanks for all help

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Sounds like you fried it, try putting the pcm in which is giving you problems and leaving the battery unhooked for about 30 mins

_________________

will do thanks

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Change which com port it's assigned to(make it wrong) and then turn the computer off and back on. Reassign it back to the correct com port. This worked for me after I thought I had fried my pcm. I couldn't get it to connect in 20 or so tries until I did this. Hopefully it will work for you to.

_________________

39# inj, LQ4, FWI, Jardine exh, OBX hdrs, PT, AL104s, PRJ Wires, DEI boots, 180 stat, 3.4 MPS, MSP poly eng mnts, F&R STBs w/ DR brkts, poly sway bar bushings, painted tails, SPO grills, spoiler & tips

thanks i will try it

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR