See if there is anything wrong. During a wot run about half way down the page my map readings seem a little high. Looking for any input on the scan. Thanks alot.

http://www.scandepot.net/viewscan.php?pk=5530

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Your boost readings seem kinda high ???

On your next scan get rid of the BARO and replace it with TPS. It will help with analyzing your scan.

_________________
Under Construction

On my mechanical gauge i get about 10psi so i don't know why that reads that way. It is the same on my aeroforce. Do you think the map is high also

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

I'm not sure about the MAP sensor on the 04+ cars,10k seems OK, I believe on the old style 97-03 the MAP only read as high as 10k so tuning anything higher was useless.

_________________
Under Construction