Can somebody also help me find a smooth intake bellow like the one from SLP for my car. I currently have a Wizaired Intake and I dont like what it currently has. Its in between the throttle body and MAF sensor. Its cheap and Im looking for something better. Anybody know of a much better alternative like the one from SLP or something similar? Any help is greatly appreciated.

Keep an eye on the F/S section over on CGP .... They stopped making those things over two years ago.

I'm not sure of the size but you might be able to use one from a LS1, but you'll have to drill a hole in it for the breather tube.

_________________
Under Construction

Not sure if the LS1 bellow will work but you can find it on ebay. http://cgi.ebay.com/ebaymotors/SLP-Smooth-Bellow-1998-2002-Camaro-Firebird-LS1-V8_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a4Q7c39Q3a1Q7c293Q3a1Q7c294Q3a200QQ_trksidZp3286Q2ec0Q2em14QQhashZitem230208541bQQitemZ150357955611QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessoriesI got mine from SLP direct a few years ago.

_________________
Too much to list...

[url]http://cardomain.com/id/trittze[/url]

If your a member of the 3800pro.com, there is a guy selling one over there right now.

http://www.3800pro.com/forum/sale/27141 ... zp-dp.html

_________________
2009.5 SBM G8 GT
November 2011 Car of the Month

I just made my own out of a 4" 22.5* PVC elbow. I cut off the flanged end so both sides are equal diameter, drilled my hole and put a rubber grommet in place so that the valve would stay in place then just used 4" couplers on either side to attach it. Let me know if you want pictures of what it looks like.

Thanks a lot to everyone...I really appreciate it & Brad if you got pictures of your install I definitely wanna check them out.

okay, i'll go take pictures and I should have them up by tomorrow at the latest

I'll take it off and snap some close ups of it before this weekend.
links to the images of the elbow I made.
http://img174.imageshack.us/img174/7237/elbow1.jpg
http://img515.imageshack.us/img515/8075/elbow2.jpg

Very clean install and it looks good. Look forward to seeing the other pics. I just might go that route if its cheaper than paying for the SLP smooth bellow.

Does anybody know if the SLP smooth bellow will be a direct fit or does it need to be modified?

I like that setup. I need to replace my intake tubing. I think I'll do the same thing.

_________________


3.5" MPS, 1.84 Rockers, 3" DP, Frt PEM, 39lb Injs., PowrTuner, Wizair
14.07@ 98.85mph 2.180 60'