I have the code 2761= DTC P2761 Torque Converter Clutch (TCC) Pulse Width Modulation (PWM) Solenoid Control Circuit. It is on a 2005. Any ideas on how to get rid of it. I am also unable to turn on the TC the light is always on. I have the aldata and it is telling me to use a certain tool that i do not have access to. Any help would be great. TIA

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

You need the switch the code is refering to replaced before you can turn the light off.

_________________
Modded Like a Mother Fu**er and still gets 20+ mpg and runs 14's

is it internal or external. It's weird since the light only came on after i swapped engines and the pcm

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Its in the trans and it came on because that trans pwm switch was bad or it just went bad here recently

_________________
Modded Like a Mother Fu**er and still gets 20+ mpg and runs 14's

is it hard to change or should it go to a tranny shop. It doesn't seem to effect the performance of the tranny.

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR