so i started takeing the hubs out and man what a pain.took the wheel of then the nut that holds the driveaxle and the hub.so i then tried to get the bolts that hold the hub to the,i think its called the steering knuckle.well i could only get 1 out, the others the driveaxle was on the way so i figured i should take the hole Steering knuckle of, well there went the outer tie rods so i went and bought those.and i rented a (hub puller-bearing puller).the driver side came out good but the other side does not want to play fair .dont know what to do now,do i take the hole driveaxle and steering knuckle out and have someone take them apart.or is there another way of takeing them apart,i even tried to put a socket on the end of the driveaxle shaft and hit it a few times but that didnt work.anyideas.thank you

You should be able to turn the wheel and gain access to the other bolts or use a swivel.

_________________
02 Chevy Zr2-sl2,2"BL,Mtclassic II's,Flowmasters,duratrak lockers 3.73's gears
97 Dodge avenger-to many to list-Sold
02 Gp Gt- Intake,Gmpp,PCM,3In Dp.

i can get 2 of them out,the one that i cant get out is the one thats on top of the driveaxle.can you buy new bolts,the ones that hold the hub.if so,where,do i have to go to the dealer or can i buy them on line .thank you for the help.

Why cant you get them out is the question. Ya you can buy new bolts but i dont understand whats wrong with your old ones..

_________________
02 Chevy Zr2-sl2,2"BL,Mtclassic II's,Flowmasters,duratrak lockers 3.73's gears
97 Dodge avenger-to many to list-Sold
02 Gp Gt- Intake,Gmpp,PCM,3In Dp.

i got the bolts on one side out and i noticed that the heads are kind of stripped.the threaded ends were all rusted so i had a hell of a time getting them out.the other side (passenger side)i cant seem to push the axle back to get to the top bolt,i have to go back to work and my next days off are wed-thurs.so i got 2 days to go back at it.the good thing is that i get to drive the wifes T/C