The price on the hub assembly at auto zone on their website is freakin crazy..

http://www.autozone.com/N,14600894//sho ... ultSet.htm

$98.99 for the "cheap" one and $157.99 for the other one..

I'm guessing that's only for one and not both sides? Need them for the front..

So much for my HU radio I was going to buy off my buddy..

_________________

call ed morad, i think kyle got a really good price on them. tahts why i nvr bought teh 4 new ones to call it a day

_________________

Isn't his stuff used? I'll give him a call, but the shipping of 2 would probably set it over what I would pay at Auto Zone for the cheap one..

Do you know if the AZ one comes with 2 or just 1?

Edit: I think its my wheel bearing anyway..my abs and the "track off" light is on..

It makes a noise when I'm riding down the road..not sure on how to describe the noise ..

_________________

Ed sells new bearings and the Autozone price is for one bearing.

_________________
Bright Red 2008 G8 GT

Mods: DRCUSTOMPARTS Center Gauge Bezel
Superchips ECM/TCM Tune- Volant CAI
Solo Axlebacks - HID's
Holden V8 Badges
My Website

Whats Eds contact info?

_________________

You can get a pair from wbody store for $170.
http://www.wbodystore.com/grandprix/whe ... p-267.html

_________________
1999 GT|SLP CAI|Borla Catback| Shift kit|18" Koblenz|GMPP Lowering|GMPP handling|Blk Headlights|ER Rcokers|HV3|HV TB http://www.fquick.com/The_Guz

_________________

That seems pretty cheap for 2? Are those made in Japan or something?

_________________

I have no idea. They are pretty good to deal with so you may want to send them an email. I'll probably be picking up a pair as soon as I fix my LIM and install my ER rockers as well as the HV3 I have.

_________________
1999 GT|SLP CAI|Borla Catback| Shift kit|18" Koblenz|GMPP Lowering|GMPP handling|Blk Headlights|ER Rcokers|HV3|HV TB http://www.fquick.com/The_Guz

Sent them an email..

Curious..I checked ZZPerformance website and they got them a little bit cheaper: https://www.zzperformance.com/grand_pri ... &catid=138

Says they got a lifetime warranty..I'm guessing that's thru ZZP then? Does ZZP make these parts or contract out for them?

_________________

bearings from ed are used but they dont keep them unless theyre worth keeping. (basically if theyre off a high mileage car theyre gone.

i got mine for $35/bearing. for all the more i had to pay, its worth it to me.

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

I'm thinking I'm just going to buy some from ZZP..I'd rather put new on my car, and ZZP with the lifetime warranty is nice..plus its only 1 day shipping for me since I live so close..

They'll have to wait though, I already had plans for the new windshield to go in.

I saw this "how-to" on ClubGP and figured I'd post it here for those that may come across this thread and need help installing..

http://baize.sys-techs.com/wheelbearing.html

(Kyle I think you were the one who posted that.)

_________________

no, i actually didnt take a million pictures to do a write up when i changed out the wheel bearing.

i just tore it apart and put it back together.

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

I meant who just posted the link on ClubGP, not who made it. But I could be wrong, can't remember who I saw posted the write up.

_________________

Bought a used WHOLE HUB and courtesy light from ed for $60 shipped back in the day............Bearing is still good 30k later

DO NOT BUY THE CHEAP ONE

The cheapos will howl IMMEDIATELY. GET THE TIMKEN. Or I kill you.

_________________

2012 Ford Focus SE Sport
2012 MINI Cooper Clubman

I have ADHD and drive a Focus. Ironically.
Although gold dust is precious, when it gets in your eyes, it obstructs your vision.

^ he kill you

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

^ No doubt.

_________________
1968 Firebird 400: Lookin for 11s
1998 GTP: parting out - click here >> viewtopic.php?f=24&t=8093&p=129200" onclick="window.open(this.href);return false;
1995 GMC 3/4 ton: Beasty to haul the toys
1999 GMC Jimmy: her daily driver
1999 Firebird: Tinker w/that later

lolz

I'm guessing your talking about the one on Auto Zone? I wouldn't call those cheap there..more like a rip-off.

I had a gpona member PM me asking if I was interested in buying his used wheel bearings with 7,000 miles on them for $85 (both) but I really want NEW..and if I bought new I'd go with the ones on ZZP.

_________________

dude 7k is nothing at all. do it.

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

So he says they are 7k..

I might have to..money is getting tight again.

Wish I had that ZZP discount I got off myspace for my b-day lol.

_________________

Ordered 2 front ones on ZZP today..they are in the process of being shipped now. Should have them either tomorrow or next day after.

Paul came over yesterday and was shocked how bad my hubs were. We switched tails to, so I got his now, they look nice!

_________________

^^^ you nvr call me for the fun stuff?

_________________

What?

_________________

_________________