Did a recent top swap and cam install and I went to start it and nothing at all.... Thought it was the battery from sittin so long and it wasnt. Got a test light and concluded the starter was getting no power at all. I checked all the grounds that I could see and it all looks fine. Any help on this would be awesome it was so disappointing after doing all this work and it doesnt start especially since I didnt mess with the starter at all!

_________________

2005 Grand Prix Base: K&N CAI,, zzp front/rear stbs, Overkilled PCM, 180deg thermostat, Pacesetter headers with full 2.5" custom exhaust, tune, VS cam, TOP SWAP wohoo

Do you have all the grounds on the trans mission? There are three of them.

So not having all or even 1 of the grounds on the transmission hooked up or right could cause the car to not start at all? Could that be the reason why my car wont start at all also??

The transmission a recent shop installed in my car was not the right one for my make and i guess they didnt hook it up. Didnt know the transmission not hooked up could cause the car to not start.

I think I checked every ground. I only saw two on the tranny though and they both went on the same bolt. I brought it to the local mechanic and he is just as stumped as I am. He thinks its a pcm issue. This really sucks a lot haha...

_________________

2005 Grand Prix Base: K&N CAI,, zzp front/rear stbs, Overkilled PCM, 180deg thermostat, Pacesetter headers with full 2.5" custom exhaust, tune, VS cam, TOP SWAP wohoo