I just picked up a set of used S&S headers. I was wondering if anyone has any tips or advice for me.
So I take it these need a doughnut gasket correct? Where should I get one?
Also, as far as the rear header, what all are people needing to remove to drop these particular ones in? Am I gonna need a trans dipstick from zzp?
Any input wold be much appreciated. Thanks.

_________________
Top Swap, 3.2, P.P.'d Blower, 4" FWI, 103's, polys, 180*, ported N*, LQ4, C.C. S&S Headers, Full Size I/C, HPTuners, FP Hotwire, custom 2.5, 10k Hid's, angel eyes, SS Grilles, blk headlights & corners, avs, tinted tails, custom headliner, aeroforce

BUMP....

_________________
Top Swap, 3.2, P.P.'d Blower, 4" FWI, 103's, polys, 180*, ported N*, LQ4, C.C. S&S Headers, Full Size I/C, HPTuners, FP Hotwire, custom 2.5, 10k Hid's, angel eyes, SS Grilles, blk headlights & corners, avs, tinted tails, custom headliner, aeroforce

I believe you will need a donut gasket for the crossover since the S&S headers are not slip fits and and use flanges. You should be able pick it up at any auto parts store. Ive never installed headers but i hear the best way to get the rear one in is to remove the dogbones and use a ratchet strap to pull the engine forward as much as much as possible the just slide it in. As for the dipstick im not absolutely sure but you should be able to use the stock one, you might have to bend it a little though.

_________________
2002 Grand Prix GTP
3" ZZP DP | CAI | ZZP 1.0 | 180 T-Stat | GMPP Handling Kit | 6000k HID |

Does anyone know of a place that I could get a new doughnut gasket from besides S&S? I called them and they said that it was 25 bucks. Personally I thought that was a little on the expensive side. Any suggestions?

_________________
Top Swap, 3.2, P.P.'d Blower, 4" FWI, 103's, polys, 180*, ported N*, LQ4, C.C. S&S Headers, Full Size I/C, HPTuners, FP Hotwire, custom 2.5, 10k Hid's, angel eyes, SS Grilles, blk headlights & corners, avs, tinted tails, custom headliner, aeroforce

I went to a local exhaust shop down the street from my house and picked one up for five bucks. I am looking forward to the install of these. All I need now is an o2 extension harness and I am all set. I cant wait.

_________________
Top Swap, 3.2, P.P.'d Blower, 4" FWI, 103's, polys, 180*, ported N*, LQ4, C.C. S&S Headers, Full Size I/C, HPTuners, FP Hotwire, custom 2.5, 10k Hid's, angel eyes, SS Grilles, blk headlights & corners, avs, tinted tails, custom headliner, aeroforce

Good luck with the install post some pics when your done!!

_________________
2002 Grand Prix GTP
3" ZZP DP | CAI | ZZP 1.0 | 180 T-Stat | GMPP Handling Kit | 6000k HID |

WILL DO SIR.

_________________
Top Swap, 3.2, P.P.'d Blower, 4" FWI, 103's, polys, 180*, ported N*, LQ4, C.C. S&S Headers, Full Size I/C, HPTuners, FP Hotwire, custom 2.5, 10k Hid's, angel eyes, SS Grilles, blk headlights & corners, avs, tinted tails, custom headliner, aeroforce