I bought a set of 1.9 rr's and I was wondering if I need to get new pushrods and springs. Thanks for the help

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

1.9's for sure. just run modded stockers, you don't have to change the springs that way.

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

Thanks

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Or, do 1.84 roller rockers. Less friction, and still don't need to change springs.

_________________
One Big Ass Mistake America

Thanks you also. I will look into the pros and cons to both.

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

why not just do a cam while you got the engine apart??

_________________

ALL GO, LITTLE SHOW

• 2004 Comp G - Modded Like A Mofo And Hibernating

• 1988 VW Jetta - Slammed Slow And Reliable

• 1994 Cadillac Eldorado ETC - Sold

because i am not pulling the engine. Pretty sure you have to to put a cam in. If i am wrong please step in. Thanks

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

no you definitely dont. you can go through the wheel well iirc.

_________________

ALL GO, LITTLE SHOW

• 2004 Comp G - Modded Like A Mofo And Hibernating

• 1988 VW Jetta - Slammed Slow And Reliable

• 1994 Cadillac Eldorado ETC - Sold

thank you mooocho

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

no problem man

_________________

ALL GO, LITTLE SHOW

• 2004 Comp G - Modded Like A Mofo And Hibernating

• 1988 VW Jetta - Slammed Slow And Reliable

• 1994 Cadillac Eldorado ETC - Sold

wayyyy easier to just pull the motor for cam install.

_________________
2000 Navy Blue Metallic GTP-old and slow. (xp cam/3.0 pulley/ssic/pacesetters/Flowmasters/SSC Springs/ h.id.s/18'' Konig Wheels)

I got 1.9s

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR

Its mixed. You dont need pushrods stock is fine. There are lots of people that have 1.9's with out springs and some that have them. I dont have any springs and im running fine.

_________________

Dave's Hocus Pocus Tuning of South Dakota

I would swap springs if you plan on rasing your shift points, or just to be on the safe side.

_________________

thanks

_________________


1.9 rr's,90lb springs,3.2zzp,180*,Overkill,Wizaird,MSD,L32 swap,AL 104's,ZZP Shift kit,SD headers, 8K HID LED tails,STB's, Don Romes Brackets Was a Base Model, 0KR