Anyone here with Pacesetters and MSD wires have problems with wires touching any of the primaries?

reason I'm asking is because I heard from a fly on a wall that I would need angled spark plug boots that go on the plugs, that number 4 is prone to touching the primary and that I'd need the 90 degree angle boot for at least that plug.

Anyone? Anyone?

_________________

mine hits, next set of wires will be angled boots, not as bad as would be expected, first set lasted almost 2 years, 2nd set lasted about 2 months, on the third now and it's been about a year with slight boot wear.

I got pacesetters with prj wires and I just bent the boots upwards. Problem solved.

_________________

Yup i got the pacesetteres and some premium wires from napa. The boot touches the primary, so all i did was .cut a little bit of the heat shielding of the stock ehaders and shoved it in between the boot and the primary. Haven't had any problems yet but i can definately see how an angled boot would help out... :p

_________________