If you hold your feet on the brake and put the tansmission in gear then step on gas lightly this will tell you if its a bad flywheel.. Noise will go away if you have a bad flywheel..

Sound of a bad flywheel

_________________
Never argue with an idiot, he will drag you down to his level and beat you with experience.

The flywheel,,

_________________
Never argue with an idiot, he will drag you down to his level and beat you with experience.

that sure looks familer

_________________

2001 white gt coupe with enough crap to make it run mid 13's with 3 bad pistons
2002 40th GTP sedan mostly stock

i am now 99% sure that is the knock the 99 has. as it goes away under load

_________________

92 LeBaron Convert: Turbo 3L 97 Grand Prix GT 4dr "Frankenstein": L67 4t65 swap
97 Grand Marquis: Summer DD 99 Grand Prix GTP: Top Swap Beater

It is not had to slide under there are look. Even if you pull the starter and converter bolts ( so you can slide the converter over) still is like 30 min or so. And with the converter over you can see the center plenty good enough to see if it is broken or not.

Sent from my DROIDX using Tapatalk

_________________

2001 white gt coupe with enough crap to make it run mid 13's with 3 bad pistons
2002 40th GTP sedan mostly stock

Thats what I did to check it.

_________________
Never argue with an idiot, he will drag you down to his level and beat you with experience.

Yup, if it goes away under load, flex plate.

If it DOESN'T then you have rod knock = your engines done.

It all starts with a little crack on them, and then spreads like wild fire. lol Sucks for sure.

~F~

_________________

Looks all to familiar haha.

_________________

GPDIY - For All Your DIY Needs
VS CAM|3.4|HEADERS|FWI|42.5#|HPT|6000k LOWS|8000k FOGS|