Here's how I got this car. jus paid off my then car 01 impala which i had a set off 10000K HID's and had around 82k miles on it.. (date was November 15. 2008) Now i had been seeing alot of GP's (04+ of course) around town and noticed how nice they looked, and i started searching online for all trim levels for it and found one that i never see around town (reason being.. everyone is driving the base gt and gtp's) and went to the nearest dealership. To my luck we found 2 GXP's in area dealership auctions... one was a Ivory white 08 and the other was a stone gray 07. the white 08 was around 32k and had 800 miles on it.. but i wasn't lookin for a brand new car, and being that its hard to keep a white car clean around here. I went with the stone gray priced at 22k for 32k miles (was a rent-a-car). After trade in and License plate credit i got the car for 14,995. Now seeing the bulb socket was the same for the 01 impala and the 07 GXP i had the dealership move my HID's to the GP GXP. Later I had a shop remove the mufflers and install 2 glass packs in thier place, and im still lookin for some better tips to put on it (I can't decide with either goin with the same style or and oval type),later i ordered and recieved a set of Smoked LED tail lights as well as a new set of HID's this time in 12000K. That is all i have done with it so far and i can't think of anything else to do with it, other then trying to find some blue bulbs for the projector fog lamps, and looking for a different spoiler. Any suggestions would be greatly appreciated. Will have some pics of it soon.

Welcome to the board, some suggestions, front and rear STB's, cold air intake, magnaflow cat back exhaust a tune from Vector Motorsports, or some thing similiar, lowering springs , ceramic brake pads, (cuts down on dust), anyhoo have fun with it!

_________________
67 Pontiac Firebird to many mods to list
98 GP GT, custome STB's K&N CAI
07 GP GXP, custom STB's from Flip, Dons brackets, Magnaflow cat back, Cai from Cold Air Inductions, 35% tint all the way around

welcome

_________________
04 GTT - Retired
Best ET 13.016
Best Trap 115.56 MPH

How are you doing. Welcome

Welcome to the GXP club ...I can agree with Mark on all of what he says as I have all that besides the tune (hopefully soon) and springs and i am very happy with it so far

_________________


Only a memory
Pioneer Nav/Magnaflow Catback/E-Cutout/Poly MM/CAI/160*/TBS/STB F&R/Wrapped X-Over & 3'' DP/Flip Paint/XP5243 Atl. Plugs/10.4mm Taylor Wires/SSC

256HP/341TQ
14.05 @ 100.4 2.24 60'

welcome to the club.

Sounds like an awesome car, welcome. Hope to see pics soon .

_________________
Watch your thoughts; they become words
Watch your words; they become actions
Watch your actions; they become habits
Watch your habits; they become character
Watch your character; it becomes your destiny

Welcome! Order another set of HID's for the fogs. I believe they're H11's. Once you get the stuff installed post up some pics.

Thanx for the suggestions and welcomes. ok got the HID fogs on order as well as for some HID's for the brights. DP 08 GXP where did you get the 3rd stop light cover from? and anyone know where ot find some LED bulbs for the front turn signal/parking lamps... i cant seem to find any for the bulb size that is in the owners manual. Also anyone know of a different spoiler for these cars? the on there now is a bit to plain and would like to change to truly make it my own.

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

I originally bought a third brake light overlay from grafxwerks.com

http://www.grafxwerks.com/products/deta ... GPGX2-1256

when i had Flip paint my tails and reverse light i had him also do the third brake light so the colors matched perfectly because the overlay i bought was a lil off in certain lights. i would suggest having Flip do one for ya because it will look a lot better then the sticker and probably wont cost too much more then what the sticker would.

_________________


Only a memory
Pioneer Nav/Magnaflow Catback/E-Cutout/Poly MM/CAI/160*/TBS/STB F&R/Wrapped X-Over & 3'' DP/Flip Paint/XP5243 Atl. Plugs/10.4mm Taylor Wires/SSC

256HP/341TQ
14.05 @ 100.4 2.24 60'

Sounds like you have got all sorts of plans for the car. Lowering springs would be nice, but to my knowledge, there aren't any for the GXP ( Not that I have found ).
Welcome to the site.

_________________

2007 GXP w/ minor mods

There are springs SSC makes some i believe. THey actually look really good on the gxp drops just right.

You are correct sir! they drop it just the right amount, without affecting the ride quality

_________________
67 Pontiac Firebird to many mods to list
98 GP GT, custome STB's K&N CAI
07 GP GXP, custom STB's from Flip, Dons brackets, Magnaflow cat back, Cai from Cold Air Inductions, 35% tint all the way around

How do I get ahold of Flip?

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

just send him a PM. He's the site admin also. He's also listed in the vendor area.

cancel that... did some lookin around and found the site to order them.

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

Here's the only other spoiler they make:

http://www.pfyc.com/pc/GP1905/04EXT/Gra ... oiler.html

_________________
Watch your thoughts; they become words
Watch your words; they become actions
Watch your actions; they become habits
Watch your habits; they become character
Watch your character; it becomes your destiny

DP where did you get your sig

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

his screen name is Corey. you can post pics and what u want your sig to have on it in the photoshop section and ask him to put one together for ya. he is good and it didnt take him long at all to get it for me.

_________________


Only a memory
Pioneer Nav/Magnaflow Catback/E-Cutout/Poly MM/CAI/160*/TBS/STB F&R/Wrapped X-Over & 3'' DP/Flip Paint/XP5243 Atl. Plugs/10.4mm Taylor Wires/SSC

256HP/341TQ
14.05 @ 100.4 2.24 60'

Thanks DP. I forgot to mention earlier that I have a blue LED underbody ground effects kit and matches my headlights perfectly. I have ordered Dons STB bars F&R, I will be ordering a CAI from Cold Air Inductions very soon, and I have decided to in the near future to order the Inferno Spoiler and Ram air Hood in Carbon Fiber.

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

I have the CAI and i like it. I have the old version but will probably be purchasing the upgraded box and intake tube when i get some extra cash....make sure you get pics up when you get that hood and spoiler

_________________


Only a memory
Pioneer Nav/Magnaflow Catback/E-Cutout/Poly MM/CAI/160*/TBS/STB F&R/Wrapped X-Over & 3'' DP/Flip Paint/XP5243 Atl. Plugs/10.4mm Taylor Wires/SSC

256HP/341TQ
14.05 @ 100.4 2.24 60'

I don't think im gonna paint the Hood or spoiler. Jus clear them and install. Being i have a grey colored car then the carbon fiber would match pretty well. But it prolly wont be for a few months before i get them and an additional two weeks after to get them installed. Also does anyone know where to find some grill inserts for the GXP on both the upper and lower grills?

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

I have been looking for grills and i havent found anything for the GXP

not interested in lowering the car, roads are rough and winter makes them worse. also is there a website that shows how to change the fogs on these cars?

_________________

HID's(8000K Dims),K&N Air Charger,LED tailights,STB's F&R with Don's brackets,Custom Catback.

when my brother changed out my fogs for HID's he removed the lower grill which gave him access to them. as far as wiring goes that is beyond me as he did all of it.

_________________


Only a memory
Pioneer Nav/Magnaflow Catback/E-Cutout/Poly MM/CAI/160*/TBS/STB F&R/Wrapped X-Over & 3'' DP/Flip Paint/XP5243 Atl. Plugs/10.4mm Taylor Wires/SSC

256HP/341TQ
14.05 @ 100.4 2.24 60'