I'm looking to get some spo exhaust tips, been trying to find some used thru the boards, and on ebay with no luck.

So I'm just gonna buy them brand new, can anyone point me in the direction of some websites that sell them or the part number

Thanks,
Dave

_________________
04GTP Comp G - XS Power Headers - K&N CAI - 3.5" - Overkilled PCM - 180 - RotorPros.com Drilled Rotors /w Ceramic Pads - 15% Tint - Started on Fire and Totaled out

New Ride 08 GXP

Here's a start...

http://www.pfyc.com/pc/GP5901/04EXH/Pol ... +Tips.html

_________________

I would say I have a set that on my car now that ill be changing out pretty soon that i'll sell for cheap. Some elbow grease and you can get them shining.

-- Sun Mar 07, 2010 11:04 pm --

or http://cgi.ebay.com/ebaymotors/NEW-04-0 ... ccessories

_________________

You can buy the SPOs for $125~ through the GM part sites... PFYC is more $$$ and their shipping is ridiculous as usual. I think they charge $15 to ship 2 signal bulbs.

_________________
T66 Turbo,3" downpipes, oversized A2A,Stg3 heads/cam,hv3,built trans,bilstein struts,ssc springs,gxp brakes,pace car spoiler(1of3??),lots more.. dyno'd @ 421WHP~13lbs boost on OLD setup. New = ???

That deal on ebay is one of the best I have seen for a brand new set.

_________________

I never saw those on eBay when I went looking when he posted up....Nice find and GREAT deal, especially being NEW!!!

_________________

PFYC is pretty crazy with their prices, but I got mine the next day and the quality is amazing.

Hopefully you can find a better deal than me, but you will not be dissapointed which ever route you go they look really nice!!

_________________

2005 Grand Prix Base: K&N CAI,, zzp front/rear stbs, Overkilled PCM, 180deg thermostat, Pacesetter headers with full 2.5" custom exhaust, tune, VS cam, TOP SWAP wohoo

I actually won the bid on the brand new tips on ebay, 70 bucks plus 12.95 shipping not too bad

now i have to order my borla xs pros, i'm going to keep the stock piping and use 2 1/4' to 2 1/2' adapters for attaching the mufflers to the stock pipes. I hope it works as easy as it sounds

_________________
04GTP Comp G - XS Power Headers - K&N CAI - 3.5" - Overkilled PCM - 180 - RotorPros.com Drilled Rotors /w Ceramic Pads - 15% Tint - Started on Fire and Totaled out

New Ride 08 GXP

yea i got the same ones. i just won them on ebay yesteday for 56 plus 11.95 shipping. should look good. are stock tips suck.

I will most likely take those off you if I dont find another pair by then. Keep me updated.

_________________

I bought a pair from Streetimports on ebay. They have 3.5" tips but a 2.5" inlet so I'll have to fit them. They are made by Yonaka Motorsports. They are BEAUTIFUL. Ofcourse they aren't SPO.

_________________
'05 Grand Prix GTP Comp G. PLOG, 3" DP, ZZP PCM, K&N Drop in Filter, ZZP strut braces,
10.4 wires, cooler plugs, 3.5 dual SS tips, SPO Spoiler, 180 thermostat, ZZP MPS 3.6 pulley,
F-Body brakes, 18" Moda wheels with 235/50ZR18 Conti DW..

I am looking at these tips from ebay. they look like they are pretty nice for cheap. my question is it says they have a 2.5in inlet is that stock size or will i need an adapter

-- Wed Mar 17, 2010 5:51 pm --

my bad they are 2.25in inlet.. same question though

_________________
2005 Grand Prix GTP Comp G

^ stock size is 2.5 so if you get anything other than that you'll have to get adapters

_________________

If you're still looking for the official OEM part # for the SPO tips, the part # is 12498009 for the set.

_________________
2004 Pontiac Grand Prix GTP Competition Group

I have a set Im going to get rid of. I may put on ebay.

You could just sell them to me. Depending on price of course.

_________________

Yeah, I know this thread is getting old but: http://cgi.ebay.com/ebaymotors/ws/eBayI ... K:MEWAX:IT

I searched by the SPO part number and ran across these.

_________________