How did you get your lip to stick? because mine would not stick at all

_________________

Dthreap wrote:

Yeah make sure your O2 isn't behind lazy, you want nice up and down.

Planeboy18 wrote:

^^Pro tip for more than just O2 sensor signals

I used small sheet metal screws and washers

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

I used small sheet metal screws and washers

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

Did you use 3M tape? They have an outdoor style and an automotive style, both of them should work fine, and dont try to do it when its cold outside

_________________

2006 Subaru Impreza WRX STi My Build Thread
2004 Grand Prix GT2 : September 2011 GPONA COTM : SOLD
1997 Grand Prix GT1 : SOLD

I tried with the outdoor mounting tape when it was 90 out, but I may have to get tape and screws today

_________________

Dthreap wrote:

Yeah make sure your O2 isn't behind lazy, you want nice up and down.

Planeboy18 wrote:

^^Pro tip for more than just O2 sensor signals

i'ma go ahead and ask my noob question, is the home depot lip to protect the lower fascia (sp?)? At any rate it looks good, like the mods you've done so far

_________________
BRAP BRAP BRAP nuff said

Nope, purely for looks

_________________

Dthreap wrote:

Yeah make sure your O2 isn't behind lazy, you want nice up and down.

Planeboy18 wrote:

^^Pro tip for more than just O2 sensor signals

dang..cause my fascia gettin killed by these ohio roads lol

_________________
BRAP BRAP BRAP nuff said

Mainly an easthetic mod on the cheap, but it will offer limited protection...

Small screws and washers is the way to go, thats what I did...

_________________

2004 GTP Comp G. The Daily Driver.
JULY 2011 GPONA COTM
http://www.youtube.com/watch?v=9uNwgZGrvJ0
1992 GTA Trans Am. The Toy.
2003 VW Jetta. The Spousal Unit.

Or he could paint the upper (stock) grilles a silver to match the metal ones below. I think that will add some contrast and "pop" more then just black. Black grilles are too comparative to stock unless they are extreme gloss or powdercoat. Just my .02. Here are some photoshopped versions to hopefully help ya decide!

Just grilles,


Then other decals/vht or w/e

I appologize for the crappy chop of the lower grille on this one! A bit rushed with school projects!


I believe either silver or black will work, it really depends on what you want the color scheme to be for the car. Consider if your going with chrome tips and other silver accents that you may want to make grilles silver. If you are going for the blacked out look consider black.

_________________

Well to add to my mod list i just got the overkill pcm from a member on here very happy with it

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

one of the last two, they both look sweet guess it comse down to which you like best, but i would def invest in the overlay for the arrow and the inlay for the pontiac on the bumper, and gratz on the purchase

_________________
BRAP BRAP BRAP nuff said

Yea i have the inlay in the front lol

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

Just some new engine bay shots

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

always been afraid to take off my dogbones lol, not sure why but i feel like the engine gonna fall or somthin if i do haha

_________________
BRAP BRAP BRAP nuff said

Just take them off one at a time.. paint one install and do the other and you'll be fine. If you take them off at the same time you'll have a hell of a time getting the engine to rock forward to slide the dogbones back in place.

Sent from my Samsung Infuse

_________________

I took both off at the same time it wasent that much of a pain to pull it forward but i wd40 the crap out of the dog bones and everything else i also flipped them

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

Well it has been a while since i posted on here sorry i am going threw an ugly divorce with kids it aint pretty but manage to do some things my baby.



another grand prix i did the engine on

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully

You better not forget to peel that clear square off your decal lol

_________________

2006 Subaru Impreza WRX STi My Build Thread
2004 Grand Prix GT2 : September 2011 GPONA COTM : SOLD
1997 Grand Prix GT1 : SOLD

ok so i just bought the modualr pully set from zzp i bought the 3.6 what type of gains am i looking at and also what to do about a belt can i use the same one? thanks you

_________________
Mods- 180* thermo-- Headlights and taillights and reverse and 3rd brake light all tinted. Cold air intake--NOW OVERKILLED and headers and 3.6 pully