How and what materials are you guys using to put those lips on?

Edit: I see its garage door seal and its done with 3m tape. What does the package look like?

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

appearance-f14/home-depot-lip-on-my-04-gtp-picss-t20489.html?hilit=Home Depot Front Lip

_________________
2005 GT owner [Non S/C] with a "big DIC".
Two years later and I still love the car.
Thanks Pontiac...Bleen is keen!

I just got done looking at that thread. I do not have a Home Depot around here so I was hoping to get a closer look at the material itself so i know what to look for at a different store like Lowes or similar. Thank you for that though never the less.

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

This is the thread Im talkin about, lets get some info! Good shit bra^

_________________

2006 Subaru Impreza WRX STi My Build Thread
2004 Grand Prix GT2 : September 2011 GPONA COTM : SOLD
1997 Grand Prix GT1 : SOLD

Maybe we can get someone to chime in with what we need cause I really like the way it looks. I can not afford an SE lip right now and this would curb my appetite for one lol

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

I just PM'd the original OP.

_________________
2005 GT owner [Non S/C] with a "big DIC".
Two years later and I still love the car.
Thanks Pontiac...Bleen is keen!

Ok guys check this out. I googled this topic and found that many people are doing this to different types of cars. Go figure right? Anyway, check this out. ]

Here is a link to it on the Aveo forums.

http://www.aveoforum.com/forum/f94/home ... -lip-8885/

And I searched the part number and came up with this...

http://www.homedepot.com/buy/tools-hard ... 52739.html

Apparently there is a foam and rubber version.. Hmm. I wonder which one I shall look for. What do you guys think?

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

I bought the part number for the foam one...but it doesn't seem to look like the ones in the pics. It just doesn't seem right... its like they changed products listed as that sku. Hell I work at home depot and can't find it....

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT

Whut.

I work at Home Depot.

_________________

2004 Grand Prix GT2: cone air intake, rebuilt HD transmission, rebuilt camshaft, rebuilt top, repainted black rims, rebuilt suspension, slotted/cross drilled rotors, Pioneer AVIC-D3 TV stereo, and more!

Yeah I'm actually on overnights right now haha.

I got the sku from a guy who did it on an srt-4 but it looks nothing like his pics. I just googled home depot lip and found his how to. Looks nothing like his pics.

-- Fri Jul 08, 2011 1:45 am --

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT

Where can we see the pics of the srt-4 install? I am determined to figure this out! I want a strip lip naow! lol

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

Its the link that you posted... the part number he listed looks nothing like the pics shown.

-- Fri Jul 08, 2011 3:03 am --

I'm determined to figure this out too!

-- Fri Jul 08, 2011 3:45 am --

Here's a couple close up pics of it. Does this look right? (To the guys who's done this)

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT

^^^^ THIS IS THE RIGHT STUFF I JUST FOUND MY OLD INSTALL PICS BUT HE BEAT ME TO IT!!
just slap on the 3m doubleside, i started in the middle.. but made sure each side over hang. then brought it the the edge of the air dam an figured what looked best for the side since, itll look ah lil funky because our bumpers have an angle right before the wheel arch..

_________________

04 Comp G... ON METH 3.5-3.6, Headers, intake, Overkill/street tune, gxp brakes, and every suspension do-dad lol
OLD PB 1/4mile in 14.07 at 98mph!! 2.0 60ft

Where did ya put the double sided tape? I was waiting for ya to chime in. I've loocked at pics of your car over and over again trying to figure it out!

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT

Lowe's has it too btw.

I used self tapping screws on the bottom as well

_________________

04 Supercharged American and 01 Turbo Swede

Psssh lowes...

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT

in the first pic the south piece is where you put the double side... so when its on the car the lil edge will be on the bottom

_________________

04 Comp G... ON METH 3.5-3.6, Headers, intake, Overkill/street tune, gxp brakes, and every suspension do-dad lol
OLD PB 1/4mile in 14.07 at 98mph!! 2.0 60ft

This is what im talkin about! Thank you!!!

_________________

2006 Subaru Impreza WRX STi My Build Thread
2004 Grand Prix GT2 : September 2011 GPONA COTM : SOLD
1997 Grand Prix GT1 : SOLD

I bought mine today. Hope it turns out good

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

Good day!

Perhaps one of you fine GP owners could post a pic showing the orientation of the "seal" on the lower facia? That would be helpful

Thanks!

_________________
2009 G8 GT -Sport and Premium Pkgs, Roto-Fab CAI, Cortex 93 Octane Tune, Billet Prototype Catch Can, BMR Front and Rear Sways, BMR RTAs, BMR Rear Cradle Bushings, BMR Steering Rack Bushing, GXP SW......and much more to come.

Well, I must not have gotten the wrong tape. It would not bond too the seal itself. It was 3m molding tape from advance auto. I do not have the funds to go buy more right now cause I'm on workers comp for my wrist and money is tight. I will be taking my seal back to lowes tomorrow. Can't say I didnt try though lol.. Maybe another day when i get the chance I will do it.

_________________
2007 Pontiac Grand Prix GT - 20% tint, painted calipers, red inlays, and more to come!

Geez Im gone from the forum for a couple days and all this chatter goes on without me...LOL

For the newer folks, I posted an appearance thread on this about 2 or 3 months ago...

The stuff pictured above is indeed it. I got the 8 ft length for 15 and change at Home depot.

Install:

This applies to those with the SE Front Valance...

Best done with the front lip off the car but, if not...start at one wheel well, get the rubber stuff to line up with the edge of the lip, and drive a self tapper in. Then keeping the rubber flush drive in small self tappers every 6-8 inches working your way arround the car.

Once installed, cut the ends even with your wheel wells.

For my 2nd install, I did it on the car by jacking it up so I could get my cordless driver under the lip.

Now for in between the screws (hint use washers with the screws), you can a) use double sided tape or b) use GE clear silicone...

Thats what I did anyways.

My first HD lip only fell victim after 3 months of going up and gown the highway bc I went up a really steep drive and that was that...

I will dig up the old thread if I can find it.

This picture was taken yesterday...



Here is my old thread...

http://www.gpona.com/forums/appearance-f14/front-spo-spoiler-version-2-0-and-a-few-other-random-pics-t24297.html

_________________

2004 GTP Comp G. The Daily Driver.
JULY 2011 GPONA COTM
http://www.youtube.com/watch?v=9uNwgZGrvJ0
1992 GTA Trans Am. The Toy.
2003 VW Jetta. The Spousal Unit.

and remember kids buy your self tappers at Home Depot so I can roll in some more dough!

_________________

LOLzzz ^^^

_________________

2004 GTP Comp G. The Daily Driver.
JULY 2011 GPONA COTM
http://www.youtube.com/watch?v=9uNwgZGrvJ0
1992 GTA Trans Am. The Toy.
2003 VW Jetta. The Spousal Unit.

Hey Gary, did you do anything to get the 3m to get it to stick better to the seal?

_________________
2004 White CompG CAI, 180* tstat, 104s, 3.5", Tuned. 0*kr WOT