Will a 04+ spoiler fit on a 97 to 03 Grand Prix without to much modification? I looked around for a bit but can't seem to find any pics. I'm sure I can make on fit but if it's and easy swap over then I will be ebaying one tomorrow.

_________________
Bryan,

1997 GP - Heads drilled for injectors, 98 ported s/c, ported lim, CAI, 3.5 Pulley, ZZP Tune, 1.75 In Primary and 2.5 In Collector headers, 3 In high flow cat, Autolite 104 coppers, MSD streetfire wires and blaster coil packs, my own poly upper motor mounts

Even if it were possible it would look really silly since the 04+ spoilers aren't nearly as wide as the 97-03 trunks. The body lines would look hella goofy.

_________________

Dubs:00 VW GTI VR6, Low and Slow 91 VW GTI 8v, Shave the Bay!! 91 VW Cabriolet 8v, bitch Basket
GP's:04 GP GT, Past now G-Ma's Girlfriend's 97 GP GT, "Project Pink Power"

i say do it

_________________

Good catch. I don't have 04+ to measure out around here. I'll ebay a 97-03 then. Thanks.

_________________
Bryan,

1997 GP - Heads drilled for injectors, 98 ported s/c, ported lim, CAI, 3.5 Pulley, ZZP Tune, 1.75 In Primary and 2.5 In Collector headers, 3 In high flow cat, Autolite 104 coppers, MSD streetfire wires and blaster coil packs, my own poly upper motor mounts

The stock 04+ spoilers are 41.25" wide (I just went out and measured). The SPO and Inferno spoilers are wider though.

_________________

Dubs:00 VW GTI VR6, Low and Slow 91 VW GTI 8v, Shave the Bay!! 91 VW Cabriolet 8v, bitch Basket
GP's:04 GP GT, Past now G-Ma's Girlfriend's 97 GP GT, "Project Pink Power"

Thanks for checking.

_________________
Bryan,

1997 GP - Heads drilled for injectors, 98 ported s/c, ported lim, CAI, 3.5 Pulley, ZZP Tune, 1.75 In Primary and 2.5 In Collector headers, 3 In high flow cat, Autolite 104 coppers, MSD streetfire wires and blaster coil packs, my own poly upper motor mounts

our spoilers don't even fit on the whole trunk

slp gen 1

_________________

Just took a quick measurement of my GP and 41.25 would look tiny...you're right!

_________________
Bryan,

1997 GP - Heads drilled for injectors, 98 ported s/c, ported lim, CAI, 3.5 Pulley, ZZP Tune, 1.75 In Primary and 2.5 In Collector headers, 3 In high flow cat, Autolite 104 coppers, MSD streetfire wires and blaster coil packs, my own poly upper motor mounts

Steal Kyle's spoiler then

_________________

Why have more money than brains? Cuz RACE CAR :

SLP Gen 1 FTW!!!!!!!!

Here it is on Mr. STi's old GTP

_________________

Dubs:00 VW GTI VR6, Low and Slow 91 VW GTI 8v, Shave the Bay!! 91 VW Cabriolet 8v, bitch Basket
GP's:04 GP GT, Past now G-Ma's Girlfriend's 97 GP GT, "Project Pink Power"

Naw, SE/Daytona/40th Anni Spoiler FTW...

Here is mine on my old car...

_________________

2004 GTP Comp G. The Daily Driver.
JULY 2011 GPONA COTM
http://www.youtube.com/watch?v=9uNwgZGrvJ0
1992 GTA Trans Am. The Toy.
2003 VW Jetta. The Spousal Unit.

Nope need limited edition.. ( figured why not join the run what I had crowd.







sent from my driod x, via my fingers through tapatalk

_________________

2001 white gt coupe with enough crap to make it run mid 13's with 3 bad pistons
2002 40th GTP sedan mostly stock

Got one off a 98 ordered up just now. Would post pics but no where to host them right now. Maybe later.

-- Fri Jul 01, 2011 9:41 am --

see it here http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWNX%3AIT

_________________
Bryan,

1997 GP - Heads drilled for injectors, 98 ported s/c, ported lim, CAI, 3.5 Pulley, ZZP Tune, 1.75 In Primary and 2.5 In Collector headers, 3 In high flow cat, Autolite 104 coppers, MSD streetfire wires and blaster coil packs, my own poly upper motor mounts

how big is an spo spoiler? that is significantly bigger than the stock spoiler

_________________