My "abs" and "track off" lights will come on intermittently. I know for a fact that my abs still work and I don't feel or hear anything unusual , so I am not sure what to look for. Any help would be great!

_________________
2000 Navy Blue Metallic GTP-old and slow. (xp cam/3.0 pulley/ssic/pacesetters/Flowmasters/SSC Springs/ h.id.s/18'' Konig Wheels)

when mine went out... it was sooo loud. and it vibrated the whole interior, especially about 50mph. maybe the wire/plug broke off, or corroded out. not sure man

_________________

[b]

_________________

sounds like a bad wheel speed sensor which is part of the bearing. the bearing itself might be perfectly fine, but the sensor is part of the bearing assembly. have fun! you'll need a torch.

_________________

"Dude!, theres enough plastic bags in here to suffocate a nursery!"

HI new to this forum my 2000 gp does the same thing my speedo and RPM gauge drops to zero . just put new tierods an controlarm bushings on no sign of bad bearing

Probably a wheel speed sensor Ericwilks. The problem is the sensor is a part of the hub/bearing assembly and the whole thing can only be replaced as a whole unit.

_________________



Although gold dust is precious, when it gets in your eyes, it obstructs your vision.

If you suspect it's the bearing itself gone bad, you can jack the car up and try to rock the tire from top to bottom. If you have excess play in that direction then you have a worn bearing. The only real way to find out what sensor is causing your trac off and abs lights to come on is to get it scanned with a tech 2 scanner at a dealer. They can tell you which sensor it's coming from.

_________________
Mods include-
Pulley boys 3.2 pulley, 20* timing, HPTuned, pacesetters, SSIC, modded 1.9's, F/R STBs on Don Rome brackets, 255lph pump, ZZP billet rails, GXP catback
Best of 13.4 at 103.... 12's this year

^^^ The sensor won't create any issues with the actual hub/bearing assembly physically.

_________________



Although gold dust is precious, when it gets in your eyes, it obstructs your vision.

def check the wiring..replaced my hub only to find out the wiring had a break in it

_________________

04 GP GT1 black spo grilles/spoiler, tinted led tails/third brake light, painted reverse bar, 6k lows/fogs, gxp door rings, STB's/DR brackets, DR door locks, GMPP RTA's, Wizair

is there grease anywhere on the hub?

_________________
2000 Navy Blue Metallic GTP-old and slow. (xp cam/3.0 pulley/ssic/pacesetters/Flowmasters/SSC Springs/ h.id.s/18'' Konig Wheels)

It's a sealed assembly. You can't add grease.

_________________



Although gold dust is precious, when it gets in your eyes, it obstructs your vision.

Where are these wires we should check because mine is on too and it's been that way. It use to come on and go off, now it's on all the time.

_________________