Basically i found out that the hub wire that connects to the abs broke off right from the end of the plug so i still had enough wire to just get a plug and connect it to the ends of the broken wire . hard to explain but i got a picture i was wondering if these connectors will work . i cut the ends of the wire sliped them in and squished them lol .

Broke off from the hub? If you have enough wire left from the hub you can make that work if not you.ll be replacing the hub.

_________________
02 Chevy Zr2-sl2,2"BL,Mtclassic II's,Flowmasters,duratrak lockers 3.73's gears
97 Dodge avenger-to many to list-Sold
02 Gp Gt- Intake,Gmpp,PCM,3In Dp.

yes from the hub. im pretty sure i got enough wire because when i saw the plug hanging down i only saw the plug, their was no wire hanging from it so im guessing it broke right from the end ? i hope

-- Wed Sep 28, 2011 5:30 pm --

the question is that the connectors i attached to the ends in the picture will the wires have to touch each other or is this ok because they say splice 1/4 of the wire and slip it in and squish the connector as i did now on the other end i will do the same but do the wires have to touch each other ??

You don't want the wires to touch and short on each other if that;s what you're asking.

_________________

'05 WRX STi - COBB Stage 2|Invidia DP|3" Borla XR-1|Coilovers|Camber Plates|Swaybars|Endlinks|Bushings|Braces|Anti Lift Kit|DBA4000s|SS lines|
Sold: 06 Cobalt SS/SC, 99 GTP 245WHP/326 Ft-lbs, 06 R6

FIXED